Tsurumi’s small dewatering pump, the LB sequence, is designed for purposes where area is tight, particularly construction. Secured by rope or chain, an LB can be used in functions which contain narrow pipes, small tanks, deep pits and in remote areas which are troublesome to reach with larger equipment. The LB mannequin has a fully symmetrical design with no protruding parts, allowing it to be lowered to unknown depths without any threat of snagging. With pressure gauge of solely 187 mm, the pump’s spherical cross-section even matches into smaller filter pipes. There can be a version with a water degree sensor which is just a few millimetres longer. The pump then controls itself automatically, switching on or off depending on the water degree. The LB presses water with dirt particles up to 6 mm in measurement by way of the housing, allowing optimum cooling of the motor. The fashions within the sequence pump 225–440 l/minute and to a maximum of 17.5 m. The smallest mannequin weighs round 10 kg dry, the largest around 30 kg.
Share