Tsurumi’s small dewatering pump, the LB sequence, is designed for purposes the place space is tight, significantly construction. Secured by pressure gauge 10 bar or chain, an LB can be utilized in applications which involve slim pipes, small tanks, deep pits and in remote areas which might be tough to reach with bigger tools. The LB model has a totally symmetrical design with no protruding elements, permitting it to be lowered to unknown depths with none threat of snagging. With a diameter of only 187 mm, the pump’s spherical cross-section even matches into smaller filter pipes. There can be a model with a water degree sensor which is just some millimetres longer. The pump then controls itself mechanically, switching on or off depending on the water level. The LB presses water with filth particles as a lot as 6 mm in size through the housing, allowing optimum cooling of the motor. The models in the series pump 225–440 l/minute and to a most of 17.5 m. The smallest mannequin weighs around 10 kg dry, the largest around 30 kg.
Share